Mesin Uji Tekan Beton 3000kN Digital (Otomatis) dengan Printer dengan Frame General

Mesin Uji Tekan Beton 3000kN Digital (Otomatis) dengan Printer

GENERAL UTILITY – Automatic Compression Testers for Cubes and Cylinders PILOT PRO

Brand/Supplied From : Controls – Italy

Model : C34P02

Standard : AASHTO T22, ASTM C39(setara dengan SNI 1974:2011)

PILOT PRO merupakan pilihan terbaik bagi laboratorium untuk pengawasan mutu/kualitas pada uji tekan Beton rutin dan Uji Lentur.

Model Ini sudah merupakan penerus dari model sebelumnya yang telah sukses dipasaran Indonesia maupun dunia, dan pada model ini kembali disempurnakan pada beberapa bagian:

Fitur Utama :

• Huge boost in efficiency and error elimination: LinK-LAB – Integrated testing station solution for seamless connection and data inputs from many ancillary devices for dimensional measurement, weight, bar code, etc.
• Automatic – time saving: test-cycle automation maximizes productivity and ensures tests are performed accurately according to pre-set methods, eliminating operator variables.
• Highly accurate and energy saving: Our DC motor technology quietly and efficiently delivers super accurate load control at both low-speed and low-loads.
• Intuitive, quick and simple operation: The integrated control system features an intuitive 5.1” color graphical display, which works like a tablet or smart-phone, and makes PILOT PRO quick and simple to operate.
• Standards compliant – peace of mind: Hardware and firmware are in total compliance with all the main international concrete testing standards including ASTM C39 and EN 12390-3.
• Multilingual functionality: The system is available in multiple languages and is fully compatible with non-Latin characters for Chinese, Cyrillic (and more).

The machines consist of:

Frame, Compression platens, PILOT PRO Automatic power and control system 

Deskripsi Umum :

Frame 
Menggunakan frame Baja berkualitas tinggi dengan dimensi yang lebih kecil. Menggunakan dudukan yang dapat menyesuaikan pada saat awal kontak dengan sampel

Compression platens 
See table. Traceable certificate of surface hardness available on request.

Pilot, Automatic power and control system 
Dual stage pump, centrifugal for fast approach and multi-piston for loading, DC motor, ES Energy Saving technology, manual valves for loading/unloading and frame selection.

132,000 points effective resolution, three channels, touch screen graphic display 240×128 pixel, sampling rate 50/sec, large storing capacity on USB pen drive, test data downloadable to PC, Ethernet port, real time management software (optional, see accessories 82-SW/DM DATAMANAGER)

Simultaneous display of load-specific load, actual load rate and load/time graph; LAN connection to PC; advanced memory management; multi coefficient calibration.
Recording facility of up to 10 test profiles for each channel including type of test (e.g. compression, flexural, indirect tensile), specimen size and shape, load rate, standard in use and other general information. Each one of the recorded test profile can be recalled automatically to save time

Safety features 
Includes: Max. pressure valve to avoid machine overloading; piston travel limit switch; emergency stop button; front and rear transparent flexible fragment guard.

Hydraulics

• Dual-stage pump: centrifugal low pressure for fast approach automatically switches to radial multi-piston high pressure for loading
• DC motor, 720W, 50-60Hz
• Maximum working pressure 700 bar
• Load/unload valve
• Second/third frame selection valve available as option

 

Hardware

• 524,000 points high-resolution/stability analog channels
• 3 channels for load sensors
• Control frequency 250 Hz
• Sampling frequency 250 Hz
• 5.1”, 800 x 480 pixel, 16 M colors, icon-driven capacitive sensing touchscreen graphic display
• Unlimited storage capacity for test data on internal 16 GB SD card
• USB port for test data storage on external USB memory stick and for firmware upgrade
• Ethernet port for PC / Internet /network communication
• Optional integrated graphic printer including Load-Time plot
• RS 232 port for data downloading in ASCII format

 

Firmware

• Execution of compression, flexure, indirect tensile, ACV tests in automatic mode with load rate controlled by a closed-loop P.I.D. system
• Execution of loading ramps with the possibility to manually increase or decrease the test speed during the test
• Pause command to maintain steady load can be enabled at a pre-set value before the test or as required while testing
• Simultaneous display of load, specific load, actual load rate, load/time graph
• Saving of the specimen failure type (to EN or ASTM) in the test results
• Download data to internal printer (optional) or to PC via RS 232 port or to USB memory stick
• PC / network communication via Ethernet
• Multi-coefficient linearization of the calibration curve for better accuracy at low loads thus avoiding the use of a second pressure transducer
• Recording facility for up to 9 test profiles for each channel including: type of test (e.g. compression, flexural, indirect tensile), specimen size and shape, load rate, test standard and other general information. Each one of the recorded test profiles can be recalled automatically to save time
• Improved PID algorithm and multi PID selection. Up to 3 different PID settings can be tuned for a variety of materials  (e.g. cylinder with neoprene pads, low strength specimens) and test methods (e.g ACV, flexure, indirect tensile).
• Compatible with the newly released Datamanager software, tailored for construction material testing laboratories, for real-time data acquisition, display and management
• Peripheral devices integration with Link-LAB
• Automatic load measurement verification procedure, by connecting suitable load cells and our digital readout unit to PC
• Language selection (including Cyrillic and Chinese)
• Unit selection (kN, ton, lbf)
• USB port for firmware upgrade and safe backup of the original configuration data (PID, calibration, etc.), in case of loss and/or data corruption. The restore of the machine to the factory settings is easy avoiding the need of any technical support.

Spesifikasi Teknis :

PHYSICAL SPECIFICATION TABLE

Model 50-	C13P02 C13P04	C23P02 C23P04	C34P02 C34P04
Capacity kN	1500	2000	3000
Max vertical daylight, mm*	350	350	350
Horizontal daylight, mm	265	340	370
Max. piston travel**, mm	50	50	50
Platen dimensions, mm	dia. 220	dia. 220	dia. 300
Platen surface hardness	55.5 HRC (600 HV)	55.5 HRC (600 HV)	55.5 HRC (600 HV)
Platens flatness toll, mm	0.03	0.03	0.03
Overall dimensions, mm	760 x 370 x 1085	835 x 440 x 1090	765 x 450 x 1160
Weight approx., kg	315	530	760

*With accessory 50-C50/CYL vertical clearance is increased by 20 mm. See test accessories.
**Use distance pieces conforming to the specimen size to avoid piston over travel

 

Ordering Info :

50-C13P02 : PILOT PRO COMPACT-Line automatic compression 1500 kN cap. for cylinders up to 160 x 320 mm and cubes up to 150mm. Conforming to ASTM C39, AASHTO T22 for 150×300 mm (6″x12″) cylinders – 230 V, 50-60 Hz, 1 Ph.

50-C23P02 : PILOT PRO COMPACT-Line automatic compression 2000 kN cap. for cylinders up to 160 x 320 mm and cubes up to 150mm. Conforming to ASTM C39, AASHTO T22 for 150×300 mm (6″x12″) cylinders – 230 V, 50-60 Hz, 1 Ph.

50-C34P02 : PILOT PRO COMPACT-Line automatic compression 3000 kN cap. for cylinders up to 160 x 320 mm and cubes up to 150mm. Conforming to ASTM C39, AASHTO T22 for 150×300 mm (6″x12″) cylinders – 230 V, 50-60 Hz, 1 Ph.

 

 

 

Kode Produksi Sebelumnya :

50 – C34C02 PILOT Automatic Compact-Line Gen. Util. compression tester, 3000 kN cap., for cubes up to 150 mm and cylinders up to dia. 160 x 320 mm. 230 V, 50-60 Hz, 1 ph.

50-C13C02 PILOT Automatic Compact-Line Gen. Util. compression tester, 1500 kN cap., for cubes up to 150 mm and cylinders up to dia. 160 x 320 mm. 230 V, 50-60 Hz, 1 ph.
50-C23C02 PILOT Automatic Compact-Line Gen. Util. compression tester, 2000 kN cap., for cubes up to 150 mm and cylinders up to dia. 160 x 320 mm. 230 V, 50-60 Hz, 1 ph.
50-C34C02 PILOT Automatic Compact-Line Gen. Util. compression tester, 3000 kN cap., for cubes up to 200 mm and cylinders up to dia. 160 x 320 mm. 230 V, 50-60 Hz, 1 ph.

Accessories :

50-C9083 – Distance piece dia 200 x 68 mm. Weight (appx.) 16,7 (2 Set)
50-C9082 – Distance piece dia 200 x 50 mm. Weight (appx.) 12,3 (2 Set)
50-C9080 – Distance piece dia 200 x 30 mm (1 Set)
50-C10B/PR – Upgrading the DIGIMAX, PILOT and AUTOMAX series to incorporate a serial graphic printer in the front panel allowing load/time plot (1 Set)

 

Call For Info

Yudhistira

Hp. 0811 188 6845;  0818 0816 0634(WA)

Email : naysite2@gmail.com